No Read - Honeywell Voyager 1450g Series User Manual

Top of Centering Window
Left of Centering Window

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data
Window (see page 9-2), an "NR" appears when a code cannot be read. If No Read is turned Off, the "NR" will not appear.
Default = Off.
On
If you want a different notation than "NR," for example, "Error," or "Bad Code," you can edit the output message (see
Formatting beginning on page 6-1). The hex code for the No Read symbol is 9C.
* Centering Off
Bottom of Centering Window
Right of Centering Window
* Off
Data
4 - 15