Chapter 3 Power Supply Units - NETGEAR M6100 Hardware Installation Manual

Power Supply Units
3.
The M6100 Switch Chassis is powered by 100-240 VAC power supply units (PSUs). AC power
supplies in the M6100 series switch chassis are fully fault tolerant and load-sharing in an N+1
configuration. After the system is properly configured, if one PSU fails, the others provide
sufficient power to operate a fully loaded switch.
This chapter includes the following sections:
• Overview of the 100-240 VAC Power Supply Unit APS1000W
• Specifications
• Safety
• Install a PSU
• Remove or Replace a PSU
• Install Blank PSU Panels
17
3