Main Unit Disassembly - Epson EPL-5900 Service Manual

EPSON EPL-5900/EPL-5900L

4.2 Main Unit Disassembly

The flowchart below shows step-by-step disassembly procedure. When disassembling each component, refer to the page number shown in the figure.
4.3.2 Paper Separator Unit Removal (p101)
4.3.4 Control Panel Removal (p102)
4.3.8 Front Cover Removal (p105)
4.3.10 Printing Head Unit Removal (p106)
4.3.11 Paper Empty Sensor (PE1) Removal (p107)
4.3.16 Main Motor Assy (M1) Removal (p115)
Note: The components shown with an underline are Regular Replacement Parts.
Disassembly and Assembly
4.2.2 Imaging Cartridge and Drum Cartridge Removal (p99)
4.3.5 Main Board Assy Removal (p103)
4.3.9 Paper Feed Roller Removal (p106)
4.3.15 Power Supply Unit and High Voltage Board Removal (p113)
Paper Feed Sensor (PS1)
Flowchart 4-1. Disassembly Flowchart
Main Unit Disassembly
4.2.1 Preparation before Dis-
Open the Top Cover
4.3.3 Right Cover Removal (p101)
4.3.7 Left Cover Removal (p105)
4.3.12 Top Cover and Rear Cover Removal (p107)
4.3.13 Fuser Unit Removal (p108)
Cooling Fan Motor (M2)
Revision B
assembling (p99)
4.3.1 Transfer Roller Removal (p100)
4.3.6 Interface Board (C409I/F) Removal (p104)
4.3.14Fuser Unit Disassembly (p109)
Paper Eject Sensor (PS3)
Backup Roller
Heater Lamp (H1)
Heat Roller
Thermistor (TH1)
Thermostat (TS1)
98