Problem Solving Guide - Miele B 1312 Operating Instructions Manual

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.

Problem solving guide

Problem
The appliance will not
operate.
The appliance will not
operate following a
power cut.
The height adjustment
mechanism on the
ironing table is not
functioning.
Possible cause
There is no power to
the appliance.
The appliance is
switched off.
The ironing table is
not clicked into
place on both sides
of the tower.
Problem solving guide
Remedy
Check whether
- the mains plug is plugged in
and switched on.
- the fuse or circuit breaker has
tripped.
Switch the appliance on with the
On/Off button s.
If the power cut occurred during
an automatic rinse, the process
will be repeated when the
appliance is switched on again.
If the power cut occurred during
automatic descaling, the
process will be resumed from
the stage in which it was
interrupted, when the appliance
is switched on again.
Click the ironing table into place
on both sides of the tower (see
"Assembling").
57