Miele B 1312 Operating Instructions Manual page 9

~
The steam ironing system must be assembled when ironing,
however the steamer can be used when the system is dismantled.
~
Ensure that the electrical connection cable does not present a
trip hazard when unwound.
~
When the appliance is heated up there is an acute danger of
burning from contact with the sole plate of the iron or the steamer
jets.
~
Do not use demineralised water (e.g. distilled) on its own to fill
the water container as this could cause the appliance to
malfunction.
~
Always place the iron with the steam function switched off on the
iron resting surface so that the sole plate does not protrude over the
edges.
Placing it otherwise could be a fire hazard.
~
Take care not to burn yourself. If the iron remains on the resting
surface for any length of time, the surface will become hot. Avoid
direct contact with it. Only touch the handle.
~
Danger of burning. Do not direct the steam or the steam jets at
people, animals or electrical appliances of any kind.
~
Danger of burning. Do not use the steamer on clothing while it is
being worn, as the clothing will intensify burning of skin.
~
Do not leave the appliance unattended when it is ready for use. If
you need to leave it, please switch it off and then disconnect it from
the mains electricity supply.
~
Do not pull on the cable to remove the plug. Pull on the plug.
~
Do not touch the electrical connection cable or the steam hose
with the sole plate of the heated iron. This could result in damage.
Warning and Safety instructions
9