Miele B 1312 Operating Instructions Manual page 59

Problem
Water is leaking from
the steam ironing
system at the height of
the water container
when it is being
transported.
The iron or steamer
does not heat up.
Possible cause
Water droplets can
collect in the area
under the water
container as a result
of frequent removal
and replacement of
the water container.
The appliance is
switched off.
The steam hose is
not plugged in
properly.
The iron has not
been used for some
time.
The temperature set
on the temperature
selector has been
reached.
The appliance is
rinsing.
The indicator lights
are showing that
there is a fault.
The appliance is
damaged.
Problem solving guide
Remedy
Dry the area underneath the
water container in the tower with
a cloth.
Switch the appliance on with the
On/Off button s.
Remove the steam hose and
plug it into the steam connection
again (see "Connection").
Move the iron or operate the
steam button *.
Wait a while until the iron heats
up again.
Or, if possible, select a higher
temperature.
Wait until the rinsing process has
been completed (see "Automatic
rinse").
Remedy the fault as explained
on the following pages.
Call Miele Service.
59