Miele B 1312 Operating Instructions Manual page 64

Problem solving guide
Problem
When using the steam
button * on the iron,
drops of water or white
deposits escape from
the steam jets.
The * indicator light
flashes once and the k
indicator light is also
lit up.
The * indicator light
flashes twice and the
k indicator light is
also lit up.
The * indicator light
flashes three times
and the k indicator
light is also lit up.
64
Possible cause
The temperature
selected on the iron
is too low.
The appliance is not
ready to steam and
the iron has not yet
reached the
selected
temperature.
Condensation has
formed in the steam
hose due to a pause
in ironing.
The appliance was
switched off during
the descaling
process or there
was a power cut.
The descaling
process was not
carried out properly.
There is a fault with
the appliance.
Remedy
Set the temperature to at least
ßß
(see "Selecting the
temperature for ironing").
Wait for the * indicator light to
signal that the steam is ready
and the selected iron
temperature has been reached
(see "Selecting the temperature
for ironing").
To avoid wet spots on your
laundry, do not direct the first
burst of steam after a pause onto
the garment.
After power has been restored
and the appliance switched on,
wait a moment. The appliance
will resume the descaling
process from the point at which
the power failed or the process
was interrupted.
Switch the appliance off and
then back on again.
If the indicator light continues to
flash, call Miele Service.
Call Miele Service.