Table of Contents
Advertisement
2.1
Introduction
This chapter describes how to set up the software demonstration for DSPC-8661-
PCXE (abbreviated as DSPC-8661 below) board. It will show you how to use the
hardware and run demo software. The release package includes Ubuntu 10.04.3 LTS
Customized ISO image with DSPCI-8661 Linux driver. The guide details the steps to
setup the hardware and run the demo. Please follow the steps in sequence to get the
demonstration working on your PC platform.
NTSC/PAL
Video
Decoder
Monitor
2.2
Running PD Demo
2.2.1
DSPCI-8661 Hardware settings
The required peripherals on PCIE card for software demonstration include:
1.
The boot mode switch (TSW1) should be set as PCIE device mode : 0101.
2.
Connect to input source you want.
3.
Connect with JTAG debug board for UART message and JTAG function
(optional).
4.
COM port cable (or USB-to-COM cable, optional).
5.
Insert DSPC-8661 into your PC PCIE slot and ready for boot, as shown in
below.
DSPC-8661-PCXE User Manual
McFW on Netra Linux
HDVPSS
VFCC
Ubuntu
VGAOut
GUI
(X-Window)
0101
18
H.264
Deinterlace
Encode
PC Linux
V4L2
H.264
Decode
Driver
(Frame Buffer)
(mplayer)
PCIe
Streaming
(EP)
PCIe
Streaming
(RC)
Advertisement
Table of Contents
