Install Port On A Housing - Ikelite 5510.45 Instruction Manual

Install Port on a Housing

There are four port locks on the front of the housing. Each port
lock has a release button. Lift
the release button and slide
each port lock away from the
port opening. In the unlocked
position, the release button
will remain in the "up"
unlocked position as shown.
When using the 5510.11
superwide port body, the port locks must be in the "down" locked
position. Refer to your 5510.11 instruction manual for this
installation.
6
Port Lock
"Down" Locked Position
"Up" Unlocked Position
Port
Locks
Port Lock
Release
Button
Lift Release
Button to
Unlock
Pull Back to
Disengage
Port
IKELITE