Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ikelite 5510.45
Summary of Contents for Ikelite 5510.45
-
Page 1: Product Registration
Product Number 5510.45 Product Registration Please register your product at ikelite.com within 15 days of purchase. Our product registration database is the best way for us to get a hold of you in the event of a product update or recall. -
Page 2: About This Product
About this Product Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product. Please visit ikelite.com to register your product to receive information on any updates, notices, or recalls pertaining to your equipment. -
Page 3: Important Notices
Use only enough lubricant to make the o-rings uniformly » shiny. Lubricant is not a sealant; excessive use of lubricant can actually attract debris and cause leaks. Use only Ikelite silicone lubricant. Do not use alcohol, cleaning agents, spray lubricants, Rain-X, »... -
Page 4: Table Of Contents
Contents Product Registration About this Product Included in the Box Important Notices Getting to Know Your Dome Port Getting to Know Your Dome Port - continued Setting Up Your Dome Port Installing the Lens Extension Setting Up Your Housing Opening the Port Locks Installing the Port Maintenance Post-Dive... -
Page 6: Getting To Know Your Dome Port
Getting to Know Your Dome Port Dome shade SIDE Dome FRONT HOUSING SIDE SIDE Dome base plate... -
Page 7: Getting To Know Your Dome Port - Continued
Getting to Know Your Dome Port - continued Lens Extension HOUSING FRONT SIDE SIDE Threads O-Rings Flange HOUSING FRONT SIDE SIDE Bayonet Mount 2.75-inch Lens Extension... -
Page 8: Setting Up Your Dome Port
Setting Up Your Dome Port Installing the Lens Extension 1. Clean and lightly lubricant the o-ring closest to the threaded end of the Lens Extension. 2. Lightly lubricate the threads of the Lens Extension and Modular Port Body. 3. Carefully thread the Lens Extension into the Dome and tighten until the flat surface below the Lens Extension threads meets the Dome base plate. -
Page 9: Opening The Port Locks
Opening the Port Locks 1. Lift the port lock release button. 2. Slide the port lock away from the port hole opening of the housing. Release Button LOCKED UNLOCKED 3. The release button will stay up while the port lock is in the open and unlocked position. -
Page 10: Maintenance
6. Push one of the four port locks towards the center of the port opening until it returns to the locked position. 7. Repeat with all four port locks. 8. Release pressure on the dome. 9. Check each port lock to ensure that the release button is flush with the lock body and the indicator paint is no longer visible. -
Page 11: Limited Warranty
Except as mentioned above, no other warranty expressed or implied applies to this Ikelite product. Service and Repairs Ikelite is most interested in performing any service to ensure that all products perform as intended. Evidence of purchase date must be provided to obtain warranty service. -
Page 12: Contact Us
If you have any questions about your product or need advice on getting the images you want, please get in touch with us and we’ll do everything we can to help you capture your unique perspective. Ikelite Underwater Systems 50 W 33rd St Indianapolis, IN 46208 USA (317) 923-4523 ikelite@ikelite.com...