Port Shade Alignment
Rotate the port so the 4 cut-outs in the shade are at the 2, 4, 8
and 10 o'clock positions in relation to the camera lens view.
When using the 5510.11 superwide port body, refer to your
5510.11 instruction manual for proper shade alignment.
Remove Port from a Housing
(except with 5510.11 Superwide Port Body)
To remove the port, lift up on each Port Lock Release Button
and slide the port lock away from the port. Lift port from
housing.
The o-ring may be left in the port hole of the housing when the
dome port is removed. Replace the o-ring in the proper position
on the port body before reassembling the housing and dome
port.
To remove a port with a 5510.11 superwide port body, refer to
the 5510.11 instruction manual.
8
Cut-out
Cut-out