System - Digital Watchdog VMAX User Manual

37 | Chapter 1 : DVR User Manual

3.1 System

The Menu button is selected by clicking [TOOL] on the menu bar or clicking the right mouse button.
Users can move mouse pointer from [SYSTEM] to [QUICK SETUP] to instantly look around the sub-menus on the menu screen.
Using the left mouse button, the user can select a desired category for editing.
3.1.1 System Info
[Date/Time] / [VGA Resolution] / [Language] / [IR Remote Id] / [firmware Upgrade] / [Video Signal format] / [IP Address]
[Mac Address] / [Keyboard controller Id] / [Keyboard Type] / [Baud rate] / [Keyboard Beep option] / [NTP] (Network Time
Protocol) / [Display] / [Screen Saver] / [Default]
N
There are two types of TIME SYNC MODE.
OTE
1) Server Mode
The operating DVR is set as a Time Sync Server, which can synchronize the time clock of another DVR(s) connected
er the same network environment.
2) Client Mode
he operating DVR is set as one of the client DVR(s). Input the IP Number of designated DVR, Advanced Client Software
CS), or Central Management System (CMS), as a Time Sync Server in [SYNC SERVER]; and then its time clock is
nchronized with Time Sync Server by the setup time in [SYNC CYCLE].
Mac address is a unique network identification number for each system.
NTSC/PAL is automatic; make sure the cameras are connected to the DVR before turning the power on of the DVR.