Table of Contents
Advertisement
Once in Setup, you can try to change the values that caused the system
boot to fail.
If the problem persists, load the default values as
described below.
N
o
t
e
:
N
o
t
e
:
If you attempt to exit the Setup program without saving
your changes, the program will prompt you with a message asking if
you want to save your changes before exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the
changes you have made to the Setup program. If you have made
changes to the fields other than system date, system time and
password, the system will ask for confirmation when choosing Exit
Discarding Changes.
Warning
Configuration has not been saved!
Save before exiting?
[Yes]
[No]
Select Yes to save changes and exit the BIOS setup program, select No
to exit BIOS without saving your changes, or press [Esc] to return to
the Exit menu.
Load Setup Defaults
This option allows you to load the default values for each of the
parameters on the Setup menus.
Setup Confirmation
Load default configuration now?
[Yes]
[No]
Select Yes to load default values. You can now select Exit Saving
Changes or make other changes before saving the values to Non-
Volatile RAM.
74
Advertisement
Table of Contents
