1. Manuals
  2. Brands
  3. Targa Manuals
  4. Laptop
  5. Extender
  6. User manual

Targa Extender User Manual

Targa extender notebook computer user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
N
o
t
e
b
o
o
N
o
t
e
b
o
o
U
s
e
r
'
s
U
s
e
r
'
s
k
C
o
m
p
u
k
C
o
m
p
u
M
a
n
u
a
M
a
n
u
a
t
e
r
t
e
r
l
l
G797001

Advertisement

Table of Contents
loading

Related Manuals for Targa Extender

Summary of Contents for Targa Extender

  • Page 1 ’ ’ G797001...
  • Page 3 Preface © Copyright 1999 © All Rights Reserved. Manual edition, August, 1999 Document Number G797 The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility...
  • Page 4 This page is intentionally blank...

  • Page 5: Table Of Contents

    Table of Contents Chapter 1: Introduction-------------------------------------------------1 Welcome to the Notebook PC --------------------------------------------------1 Unpacking the Notebook --------------------------------------------------------2 Accessories and Optional Devices ---------------------------------------------2 Getting to Know Your Computer ----------------------------------------------3 Opening the LCD Panel---------------------------------------------------3 Front Panel ------------------------------------------------------------------6 Right Panel ------------------------------------------------------------------7 Left Panel--------------------------------------------------------------------8 Rear Panel -------------------------------------------------------------------9 The Bottom Panel -------------------------------------------------------- 11 Preparing the Notebook for Transport--------------------------------------- 12 Chapter 2: Getting Started------------------------------------------- 13...
  • Page 6 TouchPad Precautions --------------------------------------------------- 27 Connecting an External Tracking Devices --------------------------------- 27 Data Storage and Retrieval ---------------------------------------------------- 27 The Floppy Disk Drive -------------------------------------------------- 27 The Removable HDD Module ----------------------------------------- 28 The CD-ROM ------------------------------------------------------------------- 29 Features of the CD-ROM Module------------------------------------- 29 Precautions for Handling CD-ROM Discs--------------------------- 30 Loading a Disc------------------------------------------------------------ 30 The Multimedia Sound System----------------------------------------------- 31 IR Communication ------------------------------------------------------------- 32...
  • Page 7 Navigating through BIOS Setup---------------------------------------------- 53 Accessing the BIOS Setup Program ----------------------------------------- 53 Item Specific Help ------------------------------------------------------- 54 The Menu Bar ------------------------------------------------------------------- 54 The Legend Bar ----------------------------------------------------------------- 54 Launching Submenus ---------------------------------------------------------- 55 General Help--------------------------------------------------------------------- 56 Save Changes and Exit the Setup Program -------------------------- 56 The Main Menu ----------------------------------------------------------------- 56 The Advanced Menu ----------------------------------------------------------- 62 The Security Menu ------------------------------------------------------------- 64...
  • Page 8 General--------------------------------------------------------------------101 Mass Storage -------------------------------------------------------------102 Video System ------------------------------------------------------------102 Electrical------------------------------------------------------------------103 Mechanical ---------------------------------------------------------------103 Operating Environment ------------------------------------------------103 Options--------------------------------------------------------------------104 Software Specifications ------------------------------------------------104 Power Management Modes--------------------------------------------104 Appendix B: Index --------------------------------------------------- 105...
  • Page 9 Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 10 Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada. viii...
  • Page 11 Safety Precautions This section is designed to assist you in identifying potentially unsafe conditions while working with this product. Required safety features have been installed in the computer to protect you from injury. However, you should use good judgment to identify potential safety hazards: •...
  • Page 12 • Do not attempt to service this product yourself, as opening or removing the cabinet may expose you to dangerous voltage. Refer all servicing to service personnel. • Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: Ø...
  • Page 13 The battery pack may explode if handled incorrectly. Do not disassemble the battery or dispose of it in fire. Keep away from children and dispose of the used battery promptly. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 14 • Ersetzen Sie den Akku nur durch einen baugleichen Typs, sonst besteht Feuer- und Explosionsgefahr! Der Akku sollte nur vom Fachpersonal ausgewechselt werden. • Dieses Gerät enthält einen Nickel-Kadmium-Akku. Im Interesse des Umweltschutzes bitte nicht mit dem Hausmüll entsorgen. Eine Entsorgung kann je nach nationalen Vorschriften über eine Kundendienststelle oder entsprechende Sammelstellen erfolgen.
  • Page 15 Abbreviations Abbreviation Meaning ACPI Advanced Configuration and Power Interface Advanced Micro Devices Advanced Power Management ASKIR Amplitude shift keyed infrared port AT Attachment (Advanced Technology Attachment) ATAPI AT Attachment Packet Interface BIOS Basic Input/Output System CMOS Complementary Metal Oxide Semiconductor Central Processing Unit DIMM Dual In-line Memory Module...
  • Page 16 Light Emitting Diode Li-Ion Lithium Ion (battery) Megabyte (1MB = 1,048,576 bytes or 1,024KB) MESI Modified Exclusive Shared and Invalid (protocol) MegaHertZ MIDI Musical Instrument Digital Interface Memory Management Unit MultiMedia EXtensions MPEG Motion Picture Experts Group MS-DOS Microsoft Disk Operating System Ni-MH Nickel Metal Hydride NTSC...
  • Page 17 Personal Inventory This Notebook computer system is designed for years of productive and pleasurable computing. Use this section to keep notes about details of your purchase. Update this section when you add new options. Date of Purchase: Dealer’ s Name: Phone: Address: E-Mail Address:...

  • Page 19: Chapter 1: Introduction

    Introduction Welcome to the Notebook PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebook’ s modular design provides maximum expandability without compromising portability. The high- performance Intel Socket-370 Celeron series 333/366/400/433/466/500/533 MHz CPU and enchanced IDE hard...

  • Page 20: Unpacking The Notebook

    Unpacking the Notebook The Notebook comes securely packaged in a sturdy cardboard shipping carton. If anything is missing or damaged, please contact your Notebook dealer immediately. The shipping carton should contain the following items: • The Notebook computer • An AC adapter •...

  • Page 21: Getting To Know Your Computer

    Getting to Know Your Computer Opening the LCD Panel At the front of the Notebook you will find a retaining latch on the display panel which locks the display in closed position when the Notebook is not in use. Slide the display panel latch to the right until the display panel releases, and then raise the LCD screen.
  • Page 22 Each of these features is briefly described below. LCD Cover Release Latch Slide this latch to the right to open the LCD cover. Cover Close Switch When you close the LCD cover, this switch turns off the LCD backlight. Stereo Speakers The internal speakers provide true stereo sound.
  • Page 23 Power/Suspend/Resume Button Pressing this button when the computer is in Suspend mode will resume normal operation. Keyboard Your computer has an 84-key enhanced keyboard that provides all the functions of a standard 101/102 key keyboard. The Built-in Microphone The built-in microphone is located to the right of the TouchPad. TouchPad The TouchPad is hardware-compatible with the IBM PS/2 mouse and software-compatible with the Microsoft mouse.

  • Page 24: Front Panel

    Indicates when lit that the Notebook is in Suspend mode. See Chapter Three for information on Power Management modes. Appears when the PCMCIA card is inserted to the PCMCIA slot. See Chapter Three for information on using PCMCIA cards. Appears when the computer is accessing the FDD drive. Indicates that the computer is accessing the hard disk drive Indicates that the keyboard is in Num Lock mode.

  • Page 25: Right Panel

    Right Panel Removable Hard Disk Drive Your computer includes a removable 2.5-inch IDE hard disk drive (9.5mm/12.7mm in height) with 1.44GB or more storage capability. The Notebook PC’ s BIOS automatically detects IDE drive types. The Floppy Disk Drive (FDD) Your Notebook has a 3.5"...

  • Page 26: Left Panel

    DC IN Connector Plug the AC adapter into this connector. Refer to Chapter Two, Connecting to a Power Source for more information. Left Panel Infrared Data Port The Infrared Data Port allows your Notebook to become truly wireless. You can use this port to transfer large amounts of data very quickly to any other machine (Notebook computers, printers, etc.) which is also equipped with an IrDA-compliant IR port.

  • Page 27: Rear Panel

    Headphone/Line-Out//SPDIF Jack Connect stereo headphones to this jack to listen to the Notebook’ s audio output. SPDIF engine receives the digital format data, regroup the date to be synchronous signal and de-multiplexes and audio and other digital data. Line In Jack This jack is for auxiliary input.
  • Page 28 It will eventually replace the need for separate connectors for external keyboards, serial ports, and parallel (printer) ports. Serial Port This port is used to connect RS-232 serial devices to the Notebook. Three types of serial devices are external mice, serial printers, and fax/modems.

  • Page 29: The Bottom Panel

    The Bottom Panel Smart Fan The Smart fan prevents the Notebook’ s CPU and other internal components from becoming overheated. Keep this fan unobstructed to allow proper ventilation to the Notebook’ s internal components. There is an automatic thermal sensor that would detect the temperature of the CPU.

  • Page 30: Preparing The Notebook For Transport

    1. Try not to work on top of a carpet, rug, paper, on the lap or any material that are easily ignited when the notebook temperature reaches a certain level. 2. We recommend you to work on top of the table or some other hard material.

  • Page 31: Chapter 2: Getting Started

    Getting Started Operating Environment To ensure long use and continued high performance, consider the following factors when setting up your computer: • Set the computer on a flat, stable surface. To prevent damage, avoid using the computer where it is expose to strong vibration. •...
  • Page 32 The power cord for the AC adapter requires a two-hole grounded AC outlet. To connect the computer to an external power source: Plug the AC adapter’ s connector into the DC-IN connector on the right side of the computer. Connect the power cord to the AC adapter and then to a wall outlet.

  • Page 33: Turning On Your Notebook Computer

    Never turn off or reset your Notebook while the hard disk or floppy disk is in use and the FDD and/or HDD status icon is lit; doing so can result in loss or destruction of your data. Always wait at least 5 seconds after turning off your Notebook before turning it back on;...

  • Page 34: Resetting The System

    • Messages that furnish important information (such as memory status) on power-on and boot processes. These non-critical malfunctions are those that cause incorrect results that may not be readily apparent. An example of a non-critical error would be a memory chip failure. In general, if the POST detects a system board failure (a critical error), the computer halts and generates a series of beeps.

  • Page 35: Operating On Battery Power

    Operating on Battery Power Your computer comes with a rechargeable battery pack that lets you operate the computer without an external power source. When the battery pack is fully charged, you can operate the computer for approximately 2 – 2.5 hours for Ni-MH battery and 2.5 – 3.5 hours for Li-Ion battery under the following conditions: •...

  • Page 36: Charging The Battery Pack

    Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. The Ni-MH battery pack can be fully charged in about 2.5 hours when the computer is turned off or over four hour when the computer is on.

  • Page 37: A Word About Ergonomics

    A Word about Ergonomics Ergonomics is the study of how people with their different physical characteristics and ways of functioning relate to their working environment (the furnishings and machines they use). The goal of Ergonomics is to incorporate comfort, efficiency, and safety into the design of keyboards, computer desks, chairs, and other items in an effort to prevent physical discomfort and health problems in the working environment.
  • Page 38 This page is intentionally left blank...

  • Page 39: Chapter 3: Using The Notebook Computer

    Using the Notebook Computer The LCD Display The Notebook comes with a Color LCD display panel that supports the following display options: Display Resolution Color Depth 12.1” DSTN/TFT SVGA 800 x 600 256 Color 14.1” TFT XGA 1024 x 768 256 Color All displays support up to 1024 x 768 x 64K color mode on an external CRT.

  • Page 40: A Tour Of The Notebook' S Keyboard

    LCD Care LCD screens are delicate devices that need careful handling. Please pay attention to the following precautions: • When you are not using the computer, keep the LCD screen closed to protect it from dust. • If you need to clean your LCD screen, use a soft tissue to gently wipe the LCD surface.

  • Page 41: Windows 95/98 Keys

    [Esc]: The Escape key allows you to cancel any specific command you may have just keyed in. [PrtSc/SysRq]: Pressing this key will cause whatever is on the screen at the time to be printed. Consult your software user’ s manual for more information. To use SysRq, press the [Fn] key and the [PrtSc/SysRq] key together.
  • Page 42 The key with the Window 95/98™ Logo activates the Start menu button on the bottom left of the screen. This key activates the properties menu and is equivalent to pressing the left mouse button. The Notebook’ s Hot Key Controls Key Combinations Definitions [Fn] + [F1]...

  • Page 43: The Function Keys

    The Function Keys Notice the twelve function keys in the top row of the keyboard. These keys appear in sequence ([F1], [F2], [F3], . . . & [F12]) from left to right. The functions of these keys vary with respect to the operating system and software in use.

  • Page 44: The Touchpad

    The TouchPad Using the TouchPad The TouchPad is a pressure sensitive pointing device that provides all the features of a two-button mouse. The TouchPad is easily accessible by moving either your left or right thumb off the space bar and on to the TouchPad. Gently move your thumb across the pressure-sensitive TouchPad in the direction you want the cursor to move.

  • Page 45: Touchpad Precautions

    TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. • Make sure the TouchPad does not come into contact with dirt, liquids or grease. • Do not touch the TouchPad if your fingers are dirty. •...

  • Page 46: The Removable Hdd Module

    Caring for Disks Under normal conditions a diskette’ s rigid plastic case will protect it from damage. However, data stored on floppy diskettes are easily corrupted. • Never touch the magnetic surface of the disk. When handling diskettes, take care that you don’ t drop them. Keep diskettes away from liquids.

  • Page 47: The Cd-Rom

    To reinsert the HDD module, simply slide the HDD into its bay until it mates with its connector. Lock the HDD module by sliding the latches in the opposite direction just as when you are releasing the HDD mentioned in Step 2.

  • Page 48: Precautions For Handling Cd-Rom Discs

    • Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session Photo CD™ , CD-I/Video CD (pcs.) • Low power consumption • 12.7mm height Precautions for Handling CD-ROM Discs • Always hold the disc by the edges, avoid touching the surface. •...

  • Page 49: The Multimedia Sound System

    Do not insert any foreign objects into the disc tray. If you experience difficulty when ejecting the CD disk tray, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the right side of the front panel. The CD disk tray should eject immediately.

  • Page 50: Ir Communication

    IR Communication At the left side of the Notebook is the Infrared (IR) communication module that consists of one Light Emitting Diode (LED) and one photo sensor. Its function is to act as a transmitter and the photo sensor acts as a receiver.

  • Page 51: Pcmcia Cards And Expansion Sockets

    PCMCIA Cards and Expansion Sockets The Notebook features two PCMCIA expansion sockets designed to interface with one or two Type II cards or stacked to accommodate one Type III card. Inserting a PCMCIA Card The computer will emit a medium tone followed by a high tone when a PC card is inserted.

  • Page 52: Power Saving Modes

    When inserting a Type III PC card, make sure the connector is inserted in the lower socket. Before ejecting a PC card, ensure that it is not being accessed by the System. For example, if the message “Write protect error writing Drive x” is displayed, the user has to change the write protect switch setting on the memory card.

  • Page 53: The Battery Power System

    The Battery Power System A fully charged pack will provide approximately 1.6 to 2.0 hours of battery life. The battery life can be extended by using the power management features. Before using the computer on battery power for the first time, check the battery status icon on the Windows Toolbar to make sure the battery is fully charged.

  • Page 54: Automatic Battery Pack Charging Function

    In general, using the battery until the low-low battery-warning indicator appears and fully recharges the battery each time (full discharge/charge cycle) will ensure the accurate reporting of the battery gauge status. Automatic Battery Pack Charging Function You can automatically charge the battery pack by using the AC Adapter.

  • Page 55: Battery Status

    Battery Status Windows 95 and Windows 98 has an applet in the Control Panel that will display an icon in the Windows taskbar indicating when the Notebook is running on battery power or is attached to the AC adapter. This applet also displays a meter that indicates how much charge is remaining in the battery.
  • Page 56 This screen indicates how much battery charge remains. For Windows 98 “Control Panel”, double click “Power Management” icon to display “Power Management Properties” as shown on the right screen. Power Scheme In setting your power options, click on the “Power Scheme” tab to select the power scheme most appropriate for you in using your computer.

  • Page 57: Battery Low Warning

    Turn off monitor Under this item, you are allowed to set the time setting to turn off the monitor whether you are operating the system by battery or AC power source. Turn off hard disks Under this item, you are also allowed to set the time setting to turn off the hard disks either operated by battery or AC power source.

  • Page 58: Small Battery For The Real Time Clock

    The Notebook can not be powered on while the battery is in the “Battery Low” state: to power the Notebook on once the battery pack has reached the “Battery Low” state, the AC adapter must be connected. Sound Meaning Continuous beeping Battery Low: Indicates that there is 10 to 15 every 1.5 seconds minutes charge remaining.

  • Page 59: Power Management Modes

    Power Management Modes The computer has a number of automatic or adjustable power saving features which you can use to maximize battery life. You can control some of these features through the Power menu in the Setup program. The computer is made up of electronic components, all of which consume electricity to operate.

  • Page 60: How To Suspend

    A Suspend Example The time out settings for Hard Disk Off, System Standby, and System Suspend specify the amount of time the system must be inactive before the next power management level is enabled. Refer to Chapter Five, The Power Menu. The example below demonstrates this function.

  • Page 61: How To Resume

    POWER.EXE must be loaded in a DEVICE = line in your CONFIG.SYS for APM (Advanced Power Management) to work correctly while under DOS or Windows 3.x. Failure to use POWER.EXE could cause the Notebook to become unstable or crash during SUSPEND/RESUME operations. POWER.EXE is not necessary while running Windows 95™...

  • Page 62: The Apm Interface

    The APM Interface In addition to the power saving features built into the resident BIOS System Configuration Utility, your Notebook computer also supports the Intel-Microsoft Advanced Power Management. APM is a cooperative interface that enhances the Notebook’ s built-in power management features by providing one of the most accurate schemes for detecting true idle.

  • Page 63: Chapter 4: Connecting Peripheral Devices

    Connecting Peripheral Devices External Keyboard/Numeric Keypad You can use your Notebook computer with an optional external keyboard, numeric keypad, or IBM PS/2 compatible mouse. The devices are “hot pluggable”. You do not have to power down the Notebook to connect these devices. Plug the keyboard cable connector into the PS/2 keyboard socket on the left side of the computer.

  • Page 64: External Monitor

    The mouse works immediately after being plugged in. External Monitor You can use an optional external VGA/SVGA display monitor with your computer. Plug the monitor’ s signal connector into the external monitor port. Secure the screws on the connector. Plug the monitor’ s power cable into a wall outlet. Before you turn on the monitor, turn on your computer and use the System Setup to designate the screen(s) that you want to use.

  • Page 65: Serial Devices

    Serial Devices The RS-232C serial interface port is used to connect a peripheral device that can both input data to the computer and receive data from the computer. The serial port is designated as COMA. After you connect a peripheral device to the serial port, secure the two small screws on the connector.

  • Page 66: Audio Sources And Output Devices

    You cannot use the TouchPad with a serial mouse at the same time. When the serial mouse is connected to your Notebook, the TouchPad will be automatically disabled. Audio Sources and Output Devices The built-in audio let you record and play back sound from a variety of sources.

  • Page 67: Port Replicator

    Port Replicator You may optionally purchase a port replicator for your Notebook computer. Rather than having to detach all your devices every time you take your Notebook computer with you, and then reattach them when you come back, all the devices connect to the port replicator, which you then connect to your computer through a single port.

  • Page 68: Installing Optional Devices

    The TV Out port accommodates a Mini DIN type connector. Installing Optional Devices The K56flex Fax/modem MDC module can be installed in the expansion card bay of the Notebook. Remove the Phillips screw from the expansion bay cover (1) and lift the cover free (2).
  • Page 69 Insert the expansion card under the Notebook casing (3) and then push down on the card so its connector mates with the mainboard connector (4). Replace the expansion bay cover and secure it with the screw you removed at Step 1. Before installing the Fax/Modem card you must first remove the RJ-11 connector cover, from the right side of the Notebook.
  • Page 70 This page is intentionally left blank...

  • Page 71: Chapter 5: Running Bios Setup

    Running BIOS Setup Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.

  • Page 72: Item Specific Help

    Item Specific Help On the right side of the Setup screen is an area labeled Item Specific Help. This area will list navigation key shortcuts and information that is specific for the item that you are currently editing. The Menu Bar The top of the screen has a menu bar with the following selections: Main - Use this menu to make changes to the basic system configuration.

  • Page 73: Launching Submenus

    The following table lists the keys found in the legend bar with their corresponding alternates and functions. Legend Key Alternate Key Function Alt + H Displays the General Help window. It can be enabled from anywhere in the BIOS. Alt + X Jumps to the Exit menu or returns to the Main menu from a submenu.

  • Page 74: General Help

    General Help In addition to the Item Specific Help window, the BIOS Setup program also provides a General Help screen can be called up from any menu by simply pressing [F1] or the [Alt] + [H] combination. Use the [PgUp] and [PgDn] keys or the up and down arrow keys (↑ ↓) to scroll through the entire help document.
  • Page 75 System Time Sets your system to the time that you specify). The format is hour, minute, second. Use the [Tab] or [Shift] + [Tab] keys to move between the hour, minute, and second fields. System Date Sets your system to the date that you specify (usually the current date).
  • Page 76 Before attempting to configure a hard disk drive, make sure you have the configuration information supplied by the manufacturer of your hard drive. Incorrect settings can result in your system not recognizing the installed hard disk. Type The following options are available for this field: •...
  • Page 77 To configure a drive that is not an IDE type drive, if it is User. Manually enter the number of cylinders, heads and sectors per track for your drive. Refer to your drive’ s documentation or look on the drive if you need to obtain this information. ATAPI Removable if the drive is an ATAPI type drive that supports high-capacity storage diskettes.
  • Page 78 • 2 Sectors • 4 Sectors • 8 Sectors • 16 Sectors LBA (Logical Block Access) Mode Control When enabled, this option uses 28-bit addressing of the hard drive without regard for cylinders, heads, and sectors. Note that Logical Block Access may decrease the access speed of the hard disk.
  • Page 79 • Mode 0 • Mode 1 • Mode 2 After using the legend keys to make changes to this submenu, press the [Esc] key to exit back to the Main menu.  Secondary Master The value in this field indicates the size of your Notebook’ s IDE Adapter 1 Master Hard Drive or the presence of a CD-ROM or DVD- ROM drive.

  • Page 80: The Advanced Menu

    The Advanced Menu Selecting Advanced from the menu bar displays the Advanced menu:  I/O Device Configuration This menu allows you to configure the Notebook’ s serial and parallel ports. Each field on this submenu is covered below. Serial Port A This field allows you to configure the Notebook’...
  • Page 81 • Enabled • Auto (default value) When Enabled is selected, the Base I/O Address menu item and Mode item appear. Mode This field allows you to enable or disable the Notebook’ s Fast Infrared (FIR) communication module. The following configuration options are available: •...

  • Page 82: The Security Menu

    ECP mode provides an automatic high burst-bandwidth channel that supports DMA for ECP in both the forward (host to peripheral) and reverse (peripheral to host) direction. When the EPP mode is selected the standard and bi-directional modes are also available. The EPP operates on a two-phase cycle. First the host selects the register within a device for subsequent operations.
  • Page 83 A Note about Passwords The BIOS Setup program allows you to specify passwords in the Security menu. The passwords control access to the BIOS and certain Security menu options during system startup. The passwords are not case sensitive. In other words, a password can be entered using either upper or lower case letters;...
  • Page 84 Set Supervisor Password This field allows you to set the Supervisor password. To set the Supervisor password, highlight this field and press the [Enter] key. The following dialog box appears: Set Supervisor Password Enter New Password Confirm New Password Type the password and press the [Enter] key. You can type up to seven alphanumeric characters.

  • Page 85: The Power Menu

    • Write Protect Write protecting the HDD boot sector will protect the HDD against boot sector viruses. However, this option may interfere with the normal operation of certain operating systems or anti-virus programs, which would normally need access to the boot sector area. Diskette Access This option requires prior setting of the Supervisor password to function.
  • Page 86 PM Control This field allows you to choose the Power Management mode. You can set Power Management to operate at all times or only when you are using battery power. The options for this field are: • Always (default value) •...
  • Page 87 When set to Maximum Power Savings, system power will be conserved to its greatest amount. The remaining fields within the Power Menu will be set to pre-defined values that ensure maximum power savings. When this field is specified as Maximum Performance, best system performance is achieved with some power conservation.
  • Page 88 • 10 Minutes • 15 Minutes • 20 Minutes • 30 Minutes • 40 Minutes • 60 Minutes Hard Disk Timeout This field allows you to specify the period of inactivity required before the hard disk spins down and enters the Standby (motor off) state.

  • Page 89: The Boot Menu

    Resume Time This option allows you to specify the time the system will resume. The Resume On Time field must be set to On for the settings in this field to function. Enter the time in hours, minutes and seconds in a 24-hour format.

  • Page 90: The Exit Menu

    • Disabled (default value) • Enabled QuickBoot Mode Setting this field to Enabled allows the system to skip certain POST operations. Options are: • Disabled • Enabled (default value)  Boot Device Priority Use the up and down arrows [↑↓] to select the boot device. Then press the plus key [+] to move the device up the list or the minus key [-] to move the device down the list.
  • Page 91 Pressing the [Esc] key does not exit this menu. You must select one of the options from this menu or a menu bar item to exit this menu. Exit Saving Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to Non- Volatile RAM.
  • Page 92 Once in Setup, you can try to change the values that caused the system boot to fail. If the problem persists, load the default values as described below. If you attempt to exit the Setup program without saving your changes, the program will prompt you with a message asking if you want to save your changes before exiting.
  • Page 93 Discard Changes This option allows you to discard the selections you’ ve made and restore the values you previously saved. Setup Confirmation Load previous configuration now? [Yes] [No] Select Yes to discard any changes and load the previously saved values. Save Changes This option saves your selections without exiting the Setup program.
  • Page 94 This page is intentionally left blank...

  • Page 95: Chapter 6: The Software Utilities Disks

    The Software Utilities Disks Installing Software Drivers in Windows 98 Windows 98 automatically installs and configures your hardware drivers. Although there are some slight differences in the interface, you will be able to intuitively follow the same procedures for Windows 98. VGA Display Drivers This section describes the operation and installation of VGA display software drivers supplied on the Driver Utility CD-ROM that is...
  • Page 96 VGA Utilities After have restarted Windows, open the “Control Panel” and double click on the “Display” icon. From “Display Properties” window, select the “Settings” tab and click on the “Advanced” tab to enter the RAGE MOBILITY AGP (English) Properties window. You will notice three new entries have been made in the Display Properties window: ATI Displays and ATI Color.
  • Page 97 This function supports two asynchronous simultaneous display paths with the features of LCD/CRT, LCD/TV or CRT/TV). Click on the “Control Panel” and double click on the “Display” icon. Click on the “Settings” tab to enter the “Display Properties” window. Click on the “Advanced” button. From the “RAGE MOBILITY AGP (English) Properties”...
  • Page 98 If you prefer to use only one display in operating your system, press the [Fn] + [F12] hot keys will shut down the LCD display, external monitor display or both at this random order. When Connecting between the LCD and TV Display Press the [Fn] + [F9] will shut down the TV screen if you prefer to use only the LCD panel for your operation.

  • Page 99: Installing The Creative Sound Drivers

    From the LCD display, open the “Display Properties” and use the cursor to drag it to the right thus moving the image to the external monitor screen. ATI Color You can adjust the right color for your window screen by moving “Brightness”...
  • Page 100 Type the following: D:\Driver\Audio\Englih\Setup\Setup.exe (If D is not your CD-ROM drive, substitute D with the correct drive letter). The “CREATIVE Software Installation” window is shown on your screen. Follow the Wizard’ s on-screen instructions to complete the installation. From the directory of C:\Creative\EV1938, you will find the following sub-directories of: •...

  • Page 101: Installing Software Drivers In Windows Nt

    Installing Software Drivers in Windows NT IDE Sound Driver Insert the CD-ROM Driver into the CD-ROM drive. Click “Start” and select the “Setting” then click on the “Control Panel”. Double click on the “Multimedia” icon and select the “Devices” tab. Click on the “Add”...

  • Page 102: Vga Display Driver

    Now that the installation is completed, you will find the devices installed in the system shown right illustration. VGA Display Driver Insert the ATI Installation CD-ROM into your CD-ROM drive. Click “Start” and Select “Run”. Type the following: D:\VGA\NTVGA\NT_b51\Setup (If D is not your CD-ROM drive, substitute D with the correct drive letter).

  • Page 103: Chapter 7: Using The Phdisk Utility

    Using the PHDISK Utility PHDISK.EXE is the utility program you use to prepare your hard disk for the Suspend to Disk function. It can be used to prepare either a dedicated partition or a DOS-based hidden file prior to storing system configuration data, and system and video memory.

  • Page 104: Create Option

    This example displays both the Save to Disk FILE INFORMATION and Save to Disk PARTITION INFORMATION headers. These headers are displayed only when both a Save to Disk partition and a Save to Disk file exist. The USAGE and OPTIONS headers are displayed in several screens displayed by PHDISK.
  • Page 105 Ø calculated memory = physical system memory + 0.3 Kbytes (Save to Disk overhead) • If the system does NOT contain a VESA video controller: Ø calculated memory = physical system memory + Ø 2 Mbytes (maximum video memory required) + 0.3 Kbytes (Save to Disk overhead) User-Specified Memory Size The user may specify a certain amount of memory to be allocated for...

  • Page 106: Reformat Option

    After the Save to Disk file is created, use PHDISK /DELETE /PARTITION to prevent Save to Disk from writing data there, instead of writing to the file. Save to Disk may not differentiate between the Save to Disk partition and the Save to Disk file until the partition is deleted.

  • Page 107: Delete Option

    /REFORMAT Option Syntax Command Description PHDISK /REFORMAT Reformats the Save to Disk partition. /PARTITION PHDISK /R /P DELETE Option When DELETE is specified, the pointers and data in the specified Save to Disk area (file or partition) are deleted. Use DELETE when bad data are displayed after a Resume from Disk operation.

  • Page 108: Messages

    Below is an example of the output of the /INFO option when a Save to Disk partition exists on the system: Messages PHDISK returns various messages, not all of which are listed here. The following list emphasizes the error messages, including a possible course of action should one of them appear: PHDISK Sign-on Message Help Screen...
  • Page 109 Unrecognized Option The following text is displayed when an invalid option or parameter is entered on the command line: Fatal Error The following text is displayed when a hard disk error is detected during any Save to Disk operation. (Don’ t panic! The word fatal simply means that the program was terminated, not that your hard disk is damaged.) Run a hard disk utility program to determine the source of the error,...
  • Page 110 Re-allocate the Save to Disk partition, if needed; or do nothing. Too Many Bad Sectors The following text is displayed when the Save to Disk partition is too small because of an increasing number of bad sectors: Execute PHDISK /CREATE /FILE to create a Save to Disk file. First Two Sectors Bad The following text is displayed when the Save to Disk partition cannot be used:...
  • Page 111 Good Sector Map Corrupted The following text is displayed when a Save to Disk partition exists, but the GSM is corrupted. Execute PHDISK /PARTITION /REFORMAT to reset the GSM flags. Not Enough System Memory The following text is displayed when not enough system memory is available to run PHDISK.
  • Page 112 This page is intentionally blank...

  • Page 113: Chapter 8: Troubleshooting

    Troubleshooting This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord – or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems.

  • Page 114: Checking Cables And Connections

    Checking Cables and Connections Start by performing a careful visual inspection of the exterior of the computer. If no LEDs are illuminated, make sure that your computer and its peripherals are getting power and communicating with each other properly. To check the power cables, and connections: If you have been using battery power, connect the Notebook to an external power source and make sure that the battery has a charge.

  • Page 115: The Power-On Self Test

    If the computer still does not start, you may have a hardware problem. The Power-On Self Test The Power-On Self Test (POST) runs every time you turn on or reset the Notebook. The POST checks memory, the main system board, the display, the keyboard, the disk drives, and other installed options.

  • Page 116: General Hardware Problems

    General Hardware Problems A few common hardware problems and suggested solutions are presented in the table below: Failure in the installation of the Audio driver. Be sure to first remove the current audio device from your system. Please follow the instruction on the installation of audio driver. The display screen is dark Make sure that the computer is not in Suspend mode.
  • Page 117 Check that a CD is properly inserted in the drive. Make sure that you are using the correct program for that kind of CD. For example, the system cannot read a data CD using an audio program. You cannot operate the printer. Check the printer cable connection.

  • Page 118: Contacting Your Dealer

    Contacting Your Dealer If you still have a problem after reading the preceding sections, the next step is to contact your dealer. Your dealer can determine if the problem is something that requires the computer to be taken to the shop.

  • Page 119: Appendix A: Specifications

    Specifications Detailed Notebook Specifications General • Intel Socket-370 Celeron series 333/366/400/433/466/500/533MHz CPU Memory • 0 MB DRAM on board • Two 144-pin SODIMM Slots • 3.3V TSOP DRAM • Supports 66(440ZXm)/100MHz(440ZX) Synchronous DRAM Core Logic Chips • Intel 440ZXm/440BX L2 Cache Memory •...

  • Page 120: Mass Storage

    • Windows 98 keys and hot keys Audio • Creative EV1938 • PCI sound/AC 97 ready • External audio inputs and amplified output • Headphone jack I/O Ports • 15-pin female D-connector video port • 9-pin male D-connector 16550 UART RS-232 serial port •...

  • Page 121: Electrical

    • 12.1” DSTN/ TFT SVGA color LCD • 14.1” TFT XGA color LCD • Video Controller: ATI Rage Mobility-M • Video DRAM: 4MB SDRAM • LCD Resolution: 1024 x 768 x 256K colors XGA TFT LCD Electrical AC Adapter • Universal input - auto-sensing - 2 wire AC and 2 wire DC DC-DC Converter •...

  • Page 122: Options

    Options • Spare battery pack: Li-Ion/Ni-MH • Port Replicator • K56 Flex fax/modem MDC module Software Specifications System Software • System BIOS: Phoenix • Video BIOS: ATI • Supported Operating Systems Ø DOS Ø Windows Ø OS/2 • Standard Software Drivers Ø...

  • Page 123: Appendix B: Index

    Index BIOS ------------------------------------- xiii, 7, 15, 32, 44, 53, 54, 55, 56, 64, 65, 66, 73, 74, 75, 86, 95, 97, 98, 104 AC adapter------------------------------ launching submenus -------------55 x, 2, 5, 8, 13, 14, 18, 37, 39, 40, brightness control ----- 16, 21, 24, 98 ACPI Advanced Configuration and Power Interface -------------- xiii...
  • Page 124 DMA ------------------ xiii, 60, 61, 64 Fn key ----- 16, 21, 22, 23, 24, 25, 31 Direct Memory Access--------- xiii function key-----------22, 23, 25, 101 DOS ------------------------------------- i, xiv, 12, 43, 44, 85, 87, 89, 91, 98, 104 Doze Mode -------------------------- 41 hardware problems ------------------98 DRAM --------- xiii, 40, 43, 101, 103 HDD -------------------------------------...
  • Page 125 24, 41, 103 Personal Computer Memory Card LED------------------ xiv, 5, 30, 32, 96 International Association ------- ------- xiii, 1, 6, 9, 33, 101, 102 Type II card------------------ 33, 34 Type III card----------------- 33, 34 Pentium-------------------------- 1, 101 memory Pentium II ----------------------- 1, 101 extended memory ---------------- 61 PHDISK utility ----------------------85 system memory ------------- 61, 93...
  • Page 126 EDO RAM------------------------- 2 RAM module---------------------- 2 replicator ------------------------ 10, 49 Ultra DMA ---------------------- 60, 61 resolution --------------xiv, 4, 21, 103 UPS -----------------------------------14 Resume ---------------5, 43, 70, 71, 89 Uninterruptible Power Supply--14 ROM------------------------------------- xiv, 1, 6, 15, 17, 29, 30, 58, 61, Universal Serial Bus ---------------- 95, 98, 103 ------------------- xiv, 9, 49, 102...

This manual is also suitable for:

Notebook computer

Table of Contents