Table of Contents
Advertisement
N
o
t
e
:
N
o
t
e
:
Before attempting to configure a hard disk drive, make sure
you have the configuration information supplied by the manufacturer
of your hard drive. Incorrect settings can result in your system not
recognizing the installed hard disk.
Type
The following options are available for this field:
•
Auto (default value)
•
None
Select Auto to automatically configure an IDE type drive. This option
only works with standard IDE drives. If your drive is an IDE type, it
will be automatically recognized and properly configured.
If automatic detection is successful, the correct values will be filled in
for the remaining fields on this submenu. If no drive is installed or if
you are removing a drive and not replacing it, select None.
CD-ROM if a CD-ROM is installed as the IDE Adapter 0 Master.
58
Advertisement
Table of Contents
