Precautions For Handling Cd-Rom Discs; Loading A Disc - Targa Extender User Manual

Targa extender notebook computer user's manual
Table of Contents

Advertisement

Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session
Photo CD™ , CD-I/Video CD (pcs.)
Low power consumption
12.7mm height

Precautions for Handling CD-ROM Discs

Always hold the disc by the edges, avoid touching the surface.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
Do not write or place objects on the surface of the disc.
Store discs in a cool dry place not to damage the disc.
Do not use benzene, thinners, or cleaners with detergent. Only
use CD-ROM cleaning kits.
Do not bend or drop the discs.

Loading a Disc

To play a CD disc, follow the instructions listed below.
1
Push the CD-ROM eject button on the CD drive door. Gently
pull the tray all the way out.
2
Carefully lift the CD-ROM by the edges and make sure the shiny
surface is face down (the side with no writing on it). Carefully
insert the CD-ROM onto the tray. Push the CD-ROM down
gently so that it snaps onto the center ring.
3
Push the tray back into the drive.
To remove a CD-ROM, do the following:
1
Check the LED display and make sure that the computer is not
accessing the CD-ROM drive.
2
Push the eject button and pull the tray all the way out.
3
Carefully pick up the CD by the edges and – while pressing down
on the center ring – remove the CD-ROM from the tray.
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Notebook computer

Table of Contents