Table of Contents
Advertisement
PCMCIA Cards and Expansion Sockets
The Notebook features two PCMCIA expansion sockets designed to
interface with one or two Type II cards or stacked to accommodate
one Type III card.
Inserting a PCMCIA Card
The computer will emit a medium tone followed by a high tone when
a PC card is inserted. When you eject a card, the computer will emit a
high tone followed by a medium tone. You can insert and remove a
PC card whether the computer is turned On or Off.
Follow these instructions to insert a PCMCIA card:
1
Hold the PCMCIA card with the arrow side up and the connector
side toward the socket.
2
Align the card connectors with the appropriate socket and
carefully slide into the socket until it locks into place. The
system will beep once to indicate that it has detected the PC card.
To remove a PC card push the respective eject button, the button will
pop out, push the button again to eject the PCMCIA.
The upper button will eject a Type II PCMCIA card while the lower
button will eject a Type II or Type III PCMCIA card from the lower
socket. Then remove the card and store it properly.
33
Advertisement
Table of Contents
