Table of Contents
Advertisement
Replacing the feed
module
A-61512 May 2006
Degradation of feeder performance, multiple feeds, stoppages, etc.
indicate a need to change the feed module. Certain paper types such
as carbonless paper or newsprint, or failure to clean regularly, and/or
use of non-recommended cleaning solvents can shorten the feed
module life.
For additional feed modules, see the next section "Supplies and
consumables".
1. Open the scanner cover by pressing the release lever.
2. Squeeze the plastic clamps that hold the feed module in place and
lift the feed module out of position.
3. Insert the new feed module into position, aligning the new module
into the slots, and pushing it in until it snaps into place.
4. Close the scanner cover.
69
Hide quick links:
Advertisement
Table of Contents
