Scanning Documents Using The Special Document Feeder - Kodak i30 / i40 User Manual

Scanning documents
using the special
document feeder
A-61512 May 2006
To scan documents using the special document feeder:
• Place the documents you want to scan onto the special document
feeder. The documents should be placed face down on the special
document feeder. The document will be drawn into the scanner,
scanned, and deposited back onto the special document feeder.
NOTES:
• Be sure the Transport Timeout value that is set up on the Options tab
(TWAIN driver) or the Scanner Control dialog box (ISIS driver)
provides sufficient time for you to position the document on the feed
shelf after pressing the Start button. See Chapter 4, Image
Processing for more information about Transport Timeout.
• When using the special document feeder, if a document has a high
reflective area (such as a hologram on a credit card), feed the
document face down.
• When you are feeding small documents, be sure you feed the
document in the center of the special document feeder to ensure that
the document passes over the left-edge sensor.
31