Table of Contents
Advertisement
The Trūper scanner allows you to perform routine maintenance without calling a service technician. This
includes replacing a variety of parts that become worn as the scanner is used.
Replace both the feed roller module and the retard roller module after 300,000 scans. Replace the roller
modules more often if you find that cleaning inside the scanner no longer improves paper jamming,
slipping, multi-feeding, marking and similar feeding problems.
Preparation: Open the Roller Exchange Kit. Roller Exchange Kits are available from the Böwe Bell +
Howell Scanning Essentials online store at
you purchased the Trūper scanner. See also the
Press the power button to the OFF position.
1
Push the ADF door release button to open the ADF door.
2
Replacing Consumables
Replacing the Paper Feed Roller Module
http://webstore.bbhscanners.com
ADF door release
"Consumable Parts and Accessories List" on page
www.bbhscanners.com
or from the reseller where
ADF door
86 of 142
13.
Advertisement
Table of Contents
