The Multifeed Tab - Kodak i30 / i40 User Manual

The Multifeed tab

A-61512 May 2006
Filter Threshold  the value that is used to identify the color which will
be dropped out. This value is applied to the color area. Color with a
Red/Green/Blue component more than the entered value is dropped.
This setting determines how much of the selected color is dropped out.
A lower value will leave more of the selected color in, while a higher
value will drop more of the selected color out.
Background  this value will be substituted in the grayscale (pre-
thresholded) image for the color being removed. Therefore, this value
should be higher than the threshold value selected on the Imaging tab
for this pixel to become the background color. For example, if you are
scanning a white document with a green form and you have selected a
bi-tonal threshold value of 127, you should choose an electronic color
drop-out background value greater than 127 so the substituted pixel will
be white in the dropped-out image.
Multi-feed Detection aids in document processing by detecting
documents that may go through the feeder overlapped.
Length Detection  choose the minimum length of the document that
can be scanned with a multi-feed being detected. The Display window
will show the size of the document as you change the value. You can
select to display this amount in Inches, Centimeters, Picas, Points,
th
20 of Points or Pixels. A value of 0 indicates no length detection.
Length detection is best used when scanning same-sized documents.
The maximum value is 14 inches.
Multifeed Stops Scanning  if this option is not selected, the scanner
will log the condition but continue to operate. If selected, the scanner
will log the condition and stop the feeder (the scanner will be disabled).
When an overlap or multi-feed is detected, the scanner stops the
feeder, clears the transport of all pages and then the documents can be
refed.
49