FrontRow Juno ITR-01 User Manual page 39

6. Unscrew battery door using the supplied
Phillips screwdriver. See Image 44
7. Using the channel indicator labels included
with your microphones, label the switch
positions you've just reprogrammed.
See Image 45
8. Move the selection switch (see Image 46)
to the channel you want to use – ideally,
the one indicated in the shaded column in
the table on page 36.
9. Close and screw down battery door.
Image 45
Channel Label Sheet
Image 46
Image 44
Pendant Microphone
Pendant
Microphone
37
Pendant
Microphone
Pass-Around
Microphone
Pass-Around Microphone
Pass-Around
Microphone