Activate Tower And Microphone; Sleep Mode - FrontRow Juno ITR-01 User Manual

Activate Tower and Microphone

1. Turn Tower on. See Image 3
2. Place microphone around neck and
connect clasp.
3. Adjust neck straps to position microphone
approximately 5in (14cm) from mouth.
See Image 4
4. Press One-Touch button to wake micro-
phone. Power indicator (chair icon) should
be green. See Image 5

Sleep Mode

For daily use, you do not need to
turn the Tower on and off. The Tower will
wake up from its energy-saving standby mode
whenever you turn on a microphone or play
audio through one of the audio connections.
The Tower will go back to sleep 30 minutes
after your microphones enter sleep mode or
you stop playing audio. After 2 hours and 30
minutes, the Tower will enter an energy-saving
deep sleep mode. When waking up the
Tower from this state, it will take approximately
30 seconds.
NOTE: If playing audio through one of
Juno's auxiliary inputs, set the volume
on the device (MP3 player, computer, etc.)
to its maximum level. Failure to do so may
result in the Juno Tower going into sleep
mode unexpectedly.
Image 3
Power
switch
Image 4
5in/14cm
Image 5
Power
indicator
One-Touch
button
10