FrontRow Juno ITR-01 User Manual page 28

Example 5
Connect either the ITM-01 Pendant or ISM-01 Pass-Around Microphone to any audio source
that's too far from the Juno Tower to conveniently connect directly.
OR
MP3 Player
The ITM-01 Pendant or the ISM-01 Pass-Around Microphones can be used to transmit audio
from a secondary audio source (MP3 player, computer, portable radio/CD/tape player) to
the receiver.
1. Plug one end of the audio adapter cord (included) in the Audio Out/headphone jack of the
secondary audio source. Plug the other end of the adapter cord to the Audio In jack on the
Microphone.
2. On the Juno Tower LCD, check the "Music Audio in" box on the Microphone's Volume
Setting screen. (See page 13)
3. Turn on the secondary audio source.
4. Turn the volume on the secondary audio source at least 75% of the way up and adjust the
microphone volume using the Juno Tower LCD to obtain the optimal volume. (See page 13)
NOTE: The use of high quality audio cables is recommended to avoid the introduction of
interference to the system.
ISM-01
Wireless Transmission
Aux In
Audio Out
Computer
26