Lcd Calibration; Firmware Update - FrontRow Juno ITR-01 User Manual

LCD Calibration

Touch Screen Calibration
Although unlikely, the Juno Tower's touch
screen may drift out of alignment over time.
If it does not respond accurately when you
touch it, it will need to be calibrated.
1. Turn the Tower off.
2. Press and hold the touch screen while
turning the Tower back on.
3. Continue pressing the touch screen until
the screen turns black.
4. Release the touch screen and wait for
calibration screen. See Image 19
5. Follow the on screen instructions.
NOTE: Use a stylus intended for touch
screens or similar soft-tipped object for
best accuracy.

Firmware Update

From time to time, FrontRow may
make improvements or enhancements
to your Tower's firmware. Use the
FrontRow Desktop or Teacher Edition
software application to update the
Tower firmware (download from
gofrontrow.com/juno).
If using the FrontRow Desktop:
1. Connect the Tower to a computer running
the FrontRow Desktop application.
2. Open the Tower settings menu by clicking
the Tower settings button.
3. Click the Check for Update button and
follow the on screen prompts.
If using Teacher Edition:
The software will notify you automatically if a
firmware update is available.
Image 19
Calibrating Touch Screen
Touch the target in the
upper-left screen corner
18