Belling 70cm User Manual page 23

USING THE PROGRAMMER/CLOCK - ELECTRIC (if fitted)
Semi-automatic cooking
There are two types of semi automatic
cooking available on this appliance.
The oven must be switched on,
and in use to use either of these
functions successfully.
The Duration method allows you to set
the oven for a specific length of time. If
a dish needed 2 hours to cook, then it
would be possible for you to set the oven
to turn off 2 hours later. This allows you
to be sure that your food will be cooked
for a set length of time and no longer.
The End Time method allows you to enter
a specific time when you would like the
oven to switch off. If you wish to leave
the oven unattended, then it offers peace
of mind that the oven will have turned
itself off at the set time.
However, once the program is set then it
cannot be adjusted. Extra time cannot be
added, nor can the end time be extended.
To cancel the semi automatic programs,
press both the Up and Down buttons
together. This can be done at any time
during the cooking process. Then if
necessary, re program.
For the instructions on how to use both of
these functions, please see the following
page.
Fully automatic cooking
This function incorporates both a duration
and an end time and is meant to be used
when you wish to delay the start time.
We recommend that the first few times
this function is used you are in the
house, this will familiarise you with your
oven and prevents food from being over
cooked or under cooked.
Care must be taken when selecting foods
for this function, it is not recommended
for certain food items which may spoil, or
are sensitive to being left.
It is also advisable to set the end time to
be as close to your return as possible to
prevent food being left standing.