Belling 70cm User Manual page 27

• Always make sure that the glass is
pushed fully into the Stop position.
• To remove the glass panel, open the
door wide, hold the top and bottom edges
and slide out.
Warning: DO NOT operate the ap-
•
pliance without the glass panel correctly
fitted.
• For your safety, glass door panels are
made of toughened glass. This ensures
that, in the unlikely event that a panel
breaks, it does so into small fragments
to minimise the risk of injury. Please take
care when handling, using or cleaning
all glass panels, as any damage to the
surfaces or edges may result in the glass
breaking without warning or apparent
cause at a later date. Should any glass
panel be damaged, we strongly recom-
mend that it is replaced immediately.
Shelf Runners
• Shelf runners can be removed to en-
able you to clean them thoroughly. Make
sure they are cool to touch and then
grasp the runners and slide out of their
hanging holes.
PULL OUT TO CLEAN
CLEANING