15-8
DS 3478 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 15-30 inserts a pause in the data transmission. To set pauses scan a
two-digit number (i.e., two bar codes) representing a 0.1 second interval. For example, scanning bar codes "0" and "1" inserts a 0.1
second pause; "0" and "5" inserts a 0.5 second delay. See
Appendix D, Numeric Bar
Codes. To correct an error or change a
selection, scan
Cancel on page
D-5.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Begin New Rule
Save Rule
Scan this bar code to save the rule.
Save Rule