Interleaved 2 Of 5 (I 2 Of 5); Enable/Disable Interleaved 2 Of 5; Set Lengths For Interleaved 2 Of - Symbol DS 3478 Product Reference Manual

Interleaved 2 of 5 (I 2 of 5)

Enable/Disable Interleaved 2 of 5

To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length.
*
Enable Interleaved 2 of 5

Set Lengths for Interleaved 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Set lengths for I 2 of 5 for any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - This option allows the digital scanner to decode only those I 2 of 5 symbols containing a selected length.
Use the numeric bar codes in
14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change the selection, scan
Cancel on page D-5.
Two Discrete Lengths - This option allows the digital scanner to decode only those I 2 of 5 symbols containing either of two
selected lengths. Use the numeric bar codes in
I 2 of 5 symbols containing either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. In
case of an error, or to change the selection, scan Cancel on
Length Within Range - This option allows the digital scanner to decode an I 2 of 5 symbol within a specific length range.
Use the numeric bar codes in
containing between 4 and 12 characters, first scan I 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (insert a leading zero
for single digit numbers). In case of an error, or to change the selection, scan Cancel on
Any Length - This option allows the digital scanner to decode I 2 of 5 symbols containing any number of characters within the digital
scanner's capability.
Due to the construction of the I 2 of 5 symbology, the digital scanner can interpret a scan line covering only
a portion of the code as a complete scan, yielding less data than is encoded in the bar code. To prevent this,
select specific lengths (I 2 of 5 - One Discrete Length - Two Discrete Lengths) for I 2 of 5 applications.
Appendix D, Numeric Bar Codes
Appendix D, Numeric Bar Codes
Appendix D, Numeric Bar Codes
Disable Interleaved 2 of 5
to select the length. For example, to decode only I 2 of 5 symbols with
to select lengths. For example, to decode only those
page D-5.
to select the length range. For example, to decode I 2 of 5 symbols
page
Symbologies 13-35
D-5.