Wand Emulation Interface 10-3
Introduction
This chapter provides instructions for programming the digital scanner to interface with a wand emulation host. This mode is used
whenever wand emulation communication is needed. The digital scanner cradle connects either to an external wand decoder or to a
decoder integrated in a portable terminal or Point-of-Sale (POS) terminal.
In this mode the digital scanner emulates the signal of a digital wand to make it "readable" by a wand decoder.
*
Throughout the programming bar code menus, default values are indicated with asterisks (
).
*
*
Indicates Default
Feature/Option
Transmit Unknown Characters