Fn1 Substitution Values - Symbol DS 3478 Product Reference Manual

Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 1>
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>

FN1 Substitution Values

The keyboard wedge and USB HID keyboard hosts support a FN1 Substitution feature. Enable this to replace any FN1 character (0x1b)
in an EAN128 bar code with a defined value. This value defaults to 7013 (Enter Key).
1. To select a FN1 substitution value, scan the following bar code.
2. Enter the 4-digit FN1 substitution (ASCII) value by scanning each digit in
Character Set table for the host interface.
To correct an error or change the selection, scan
To enable FN1 Substitution for keyboard wedge, scan the Enable Keyboard Wedge FN1 Substitution bar code on
To enable FN1 Substitution for the USB HID keyboard, scan the Enable USB Keyboard FN1 Substitution bar code on
Set FN1 Substitution Value
Cancel on page D-5.
Miscellaneous Scanner Options 14-7
<PREFIX> <DATA> <SUFFIX 2>
Appendix D, Numeric Bar Codes. See the ASCII
page 6-13.
page 8-11.