Special Commands; Pause Duration; Begin New Rule; Save Rule - Symbol LS4208 Reference Manual

14 - 8 Symbol LS4208 Product Reference Guide

Special Commands

Pause Duration

This parameter, along with
scan a two-digit number (i.e., two bar codes) representing a 0.1 second interval in the range of 0.1 to 9.9. For
example, scanning bar codes
1 second. For numeric bar codes see
selection, scan Cancel on page

Begin New Rule

Scan this bar code to start entering a new rule

Save Rule

Scan this bar code to save the rule.
Send Pause on page 14-28, inserts a pause in the data transmission. To set the pause
and inserts a 0.1 second pause;
0 1
Appendix D, Numeric Bar
D-3.

Pause Duration

Begin New Rule

Save Rule

and gives a 0.5 second delay. The default is
0 5
Codes. In case of an error, or to change the