Introduction; Scanning Sequence Examples; Errors While Scanning; Miscellaneous Default Parameters - Symbol DS 3478 Product Reference Manual

Introduction

This chapter includes bar codes to customize how data is transmitted to the host device. Also see each host chapter for the
appropriate host connections and host device features for the digital scanner. See
Data Formatting for customizing data for transmission to the host device.
Before programming, follow the instructions in
The digital scanner is shipped with the settings shown in
and miscellaneous scanner defaults). If the default values suit requirements, programming is not necessary. Set feature values by
scanning single bar codes or short bar code sequences.

Scanning Sequence Examples

In most cases, scan only one bar code to set a parameter value. Other parameters, such as Prefix Value, require scanning several
bar codes in sequence. See the parameter description for this procedure.

Errors While Scanning

Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter.

Miscellaneous Default Parameters

Table 14-1 lists the defaults for miscellaneous scanner options parameters. To change an option, scan the appropriate bar code(s) in
this chapter.
See Appendix A, Standard Default Parameters
default parameters.
Miscellaneous Scanner Options
Transmit Code ID Character
Prefix Value
Suffix 1 Value
Suffix 2 Value
Scan Data Transmission Format
FN1 Substitution Values
Transmit "No Read" Message
Report Version
Chapter 1, Getting
Table 14-1
for all user preference, host, symbology, and miscellaneous
Table 14-1. Miscellaneous Scanner Options Default Table
Parameter
Chapter 13, Symbologies
Started.
(also see Appendix A, Standard Default Parameters
Default
None
7013 <CR><LF>
7013 <CR><LF>
Data As Is
Set FN1 Substitution Value
Disable No Read
Miscellaneous Scanner Options 14-3
and Chapter 15, Advanced
for all host
Page Number
14-4
14-5
14-5
14-6
14-7
14-8
14-8