Table of Contents
Advertisement
15 - 6 Symbol DS3408 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on
transmission. Pauses are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second
intervals. For example, scanning bar codes "0" and "1" inserts a 0.1 second pause; "0" and "5" inserts a 0.5 second
delay. See
Appendix D, Numeric Bar
D-3.
Begin New Rule
Scan this bar code to start entering a new rule
.
Save Rule
Scan this bar code to save the rule.
page 15-30
Codes. To correct an error or change a selection, scan
Pause Duration
Begin New Rule
Save Rule
allows a pause to be inserted in the data
Cancel on page
Advertisement
Table of Contents
