User Preferences Default Parameters - Symbol DS 3478 Product Reference Manual

4-4 DS 3478 Product Reference Guide

User Preferences Default Parameters

Table 4-1 lists the defaults for user preference parameters. To change any option, scan the appropriate bar code(s) provided in
Preferences on page 4-5.
See Appendix A, Standard Default Parameters
default parameters.
User Preferences
Set Default Parameter
Parameter Scanning
Beeper Tone
Beeper Volume
Power Mode
Beep After Good Decode
Decode Session Timeout
Fuzzy 1D Decoding
Connection Maintenance Interval
Radio Output Power
Parameter Broadcast
Single Point/Multipoint Operation
for all user preference, host, symbology, and miscellaneous
Table 4-1. User Preferences Default Table
Parameter Default Page Number
All Defaults 4-5
Enable 4-5
Medium 4-6
High 4-6
Reduced 4-7
Enable 4-7
3.0 seconds 4-8
Enable 4-8
15 minutes 4-9
Bluetooth Class 1 4-11
Enable 4-11
Single Point 4-12
User