Table of Contents
Advertisement
Useful Functions
c
•
To use the HDMI Link function, you must configure the connected device. See the documentation
supplied with the connected device for more information.
•
Even when using the WirelessHD Transmitter with Power On Link set to Device -> PJ or
Bidirectional, if WirelessHD is set to On, this projector also turns on when the AV device connected
to the WirelessHD Transmitter is turned on (EH-TW6600W only).
Link
p.79
Device Connections
You can check the connected devices that are available for HDMI Link, and select on the device you want to
project the image from. Devices that can be controlled by HDMI link automatically become the selected
device.
a
Press the
button, and then select
Device Connections.
The Device Connections list is displayed.
Devices that have an aqua icon to their left
are linked.
If the device name cannot be determined
this field is left blank.
c
•
Only one AV amplifier is recognized. If multiple amplifiers are connected, the amplifier recognized first
is displayed.
•
If the cable does not meet the HDMI standards, operations are not possible.
•
Some connected devices or functions of those devices may not operate properly even if they meet the
HDMI CEC standards. See the documentation and so on supplied with the connected device for more
information.
Settings-HDMI Link-Power On
s
b
Select the device you want to operate
using the HDMI Link function.
69
Advertisement
Table of Contents
