Table of Contents
Advertisement
Useful Functions
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
Remote control
Displays the sub-screen (small screen) for
the connected device.
Ex.) When projecting images for the device
connected to the HDMI2 port
button.
WirelessHD Trans‐
mitter
b
The target screen changes each time
you press the
c
After selecting the target screen,
please wait for a moment.
The projected image is switched.
c
The screen that is not receiving an image
signal is displayed in blue or black.
Ex.) When images for the device
connected to the HDMI2 port are not
displayed
The connected AV device is not turned
on, or the cables are not connected
correctly. Check that the AV device is
turned on, or all the cables required for
projection are securely connected.
66
button.
Advertisement
Table of Contents
