Table of Contents
Advertisement
Configuration Menu
Function
Super-resolu‐
0 to 5
*5
tion
Detail Enhance‐
ment
*3
Auto Setup
On, Off
Advanced
Noise Reduc‐
*2 *5
tion
Setup Level
(Advanced)
Overscan
HDMI Video
Range
Image Processing
Menu/Settings
0 to 100
Off, 1, 2, 3
*2
0%, 7.5%
*2 *5
Auto, Off, 2%, 4%,
6%, 8%
Auto, Normal, Ex‐
*2
panded
*5
Fine, Fast
Reduces blurring that occurs at the edge of im‐
ages when the resolution is increased.
This setting enhances the contrast in an image
to create the image with more emphatic texture
and material feel. The higher the number is, the
stronger the enhancement effect is from the out‐
line area.
p.39
s
Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the Tracking, Position, and
Sync. are automatically configured.
(This can only be set when Image Processing is
set to Fine.)
Smoothes out rough images. There are three
modes available. Select your favorite setting.
It is recommended that this is set to Off when
viewing image sources in which noise is very low,
such as for DVDs.
(This can be set when receiving an NTSC or com‐
ponent video signal from the Video port.)
Change this setting when using devices with a
different black level (Setup Level) such as prod‐
ucts designed for the Korean market. Check the
specifications for your connected device before
changing this setting.
Changes the output image ratio (the range of the
projected image).
•
Off, 2 to 8%: Sets the range of the image. Off
projects all ranges. Depending on the image sig‐
nal you may notice noise at the top and bottom
of the image.
•
Auto: This can only be set when receiving signal
input from the HDMI1 or HDMI2 ports, or from
WirelessHD. This may be automatically set to
Off or 8% depending on the input signal.
(This can only be set when EPSON Super
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 port on the
projector is automatically detected and set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
The Auto option is not displayed when connec‐
ted to a connected device's DVI port.
Performs processing to improve the image qual‐
ity or response speed.
78
Explanation
s
p.41
s
p.39
Advertisement
Table of Contents
