Table of Contents
Advertisement
Appendix
*1
When using the WirelessHD Transmitter with EH-TW6600W, and the following conditions are satisfied
Settings - WirelessHD - WirelessHD is set to On
Settings - HDMI Link - Power On Link is set to Bidirectional or Device -> PJ
*2
For use at an altitude of 2286 m or higher, it is +5 to +30°C.
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Обладнання відповідає вимогам Технічного регламенту обмеження використання деяких небезпечних
речовин в електричному та електронному обладнанні.
Angle of tilt
If you use the projector tilted at an angle of more than 10°, it could be
damaged or cause an accident.
ESC/VP21 Commands
Use of ESC/VP21 enables control of the projector from an external device. For more details, see the following
Web site.
http://www.epson.com
RS-232C Cable layouts
•
Connector shape: D-sub 9-pin (male)
•
Projector input port name: RS-232C
•
Signal name:
Signal Name
GND
TD
RD
<At the projector>
<At the projector>
Function
Signal wire ground
Transmit data
Receive data
(PC serial cable)
114
p.79
s
<At the computer>
<At the computer>
Advertisement
Table of Contents
