Table of Contents
Advertisement
Useful Functions
Press the [Pairing] button for a while on the 3D Glasses to start pairing.
a
Turn on the 3D Glasses by sliding the
[Power] switch to On.
The indicator turns on for several seconds,
and then turns off.
c
•
For 3D Glasses that have not been used, pairing is performed when the 3D Glasses are turned on. You
do not need to perform pairing if 3D images can already be viewed correctly.
•
Once pairing has been performed, you can view 3D images the next time the devices are turned on.
•
You can perform pairing within a range of three meters from the projector. While pairing is being
performed, make sure you stay within a range of three meters from the projector. Otherwise, pairing
will fail.
•
If synchronization cannot be performed within 30 seconds, pairing is automatically canceled. When
pairing is cancelled, 3D images cannot be viewed because pairing fails.
Wearing the 3D Glasses
a
Turn on the 3D Glasses by sliding the
[Power] switch to On.
The indicator turns on for several seconds,
and then turns off.
b
Press and hold the button for three
seconds.
The indictor flashes green and red in turn.
If pairing has been performed correctly, the
indicator turns on for ten seconds and then
turns off.
b
Put on the 3D Glasses and enjoy the
show.
c
•
When you have finished using the
3D Glasses, turn them off by
sliding the [Power] switch to Off.
•
If the 3D Glasses are not used for
at least 30 seconds, they turn off
automatically. To turn the 3D
Glasses back on, slide the
[Power] switch to Off, and then
slide it back to On.
•
You need more pairs of optional
3D Glasses if more than one
person will be viewing the 3D
image.
48
p.109
s
Advertisement
Table of Contents
