Operation Of Rear Panel Dvd 4010 - CyberHome 4620 User Manual

OPERATION

Operation of rear panel DVD 4010

1
1. AC IN: For connection of the supplied AC power cord. Plug the
matching end of the power cord into the unit before con-
necting the other end to the wall socket.
2. COAXIAL: Digital coaxial audio output for connection to a digital
audio device (amplifier/receiver). Please note that the
amplifier/receiver has to be compatible to Dolby Digital,
MPEG and/or PCM (for more information please refer to
the manual of your amplifier/receiver).
3. AUDIO OUT L/R: Analogue 2-channel audio outputs (white/red socket) for
connection to a television, AV receiver, beamer or stereo
system.
4. VIDEO: Composite video output (yellow socket) for connecting to
a TV or AV receiver with a video input (CVBS, compos-
ite video) by an audio/video cable.
5. REGION CODE: Indicates that the device is set to DVD region code "2".
6. RGB / SCART: For connection to a television or monitor that is compat-
ible with this kind of connection by means of a 21-pin
SCART cable. This connection enables the output of
audio and video signals.
7. S-VIDEO: S-Video output for connecting to a TV or AV receiver with
S-Video input by an S-Video cable. The S-Video output
can be used instead of the video output. By this, a high-
er video quality can be reached than with composite
video.
10
2 3 4 5
2
VIDEO
R
AUDIO OUT AUDIO OUT
L
S-VIDEO
COAXIAL
RGB / AV SCART OUTPUT RGB / AV SCART OUTPUT
7
6