Auto Configuration - D-Link DIR-890L User Manual

Section 3 - Configuration
Auto Configuration is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP's server. Some
ISPs require you to change some settings on your side before your router can connect to the IPv6 Internet.
DNS Type: Select either Obtain DNS server address or Use the following
DNS .
If you selected Use the following DNS address above, enter the
Primary DNS
Server: Primary DNS Server address.
Secondary DNS If you selected Use the following DNS address above, enter the
Server: Secondary DNS Server address.
Enable DHCP-PD: Enable or disable prefix delegation services.
LAN IPv6 Address: If you disabled DHCP-PD, enter the LAN (local) IPv6 address for
the router.
LAN IPv6 Link- Displays the router's LAN Link-Local Address.
Local Address:
Enable or disable the Automatic IPv6 Address Assignment
Enable Automatic
IPv6 Address feature.
Assignment:
Enable or disable Automatic DHCP-PD in LAN services.
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful
DHCPv6.
Type:
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-890L User Manual

Auto Configuration

42