System - D-Link DIR-890L User Manual

Section 3 - Configuration
This page allows you to save the DIR-890L's current configuration, load a previously saved configuration, and reset the router to the factory default settings.
From the Admin page click System.
Click Save to save the current router configuration settings to a file on
Save Settings
To Local Hard your computer's hard drive.
Drive:
Click Select File to locate and load previously saved router configuration
Load Settings
From Local file. This will overwrite the router's current configuration.
Hard Drive:
Restore To This option will restore all configuration settings back to the settings
Factory Default that were in effect at the time the router was shipped from the factory.
Settings:
Any settings that have not been saved will be lost, including any rules
that you have created. If you want to first save the current router
configuration settings to your computer, use the Save button above.
Reboot The Click Reboot to reboot the router.
Device:
D-Link DIR-890L User Manual

System

76