Pptp - D-Link DIR-890L User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your Internet service provider (ISP) can
provide you with a username and password.
PPTP Server IP Enter the PPTP Server IP Address provided by your ISP.
Address:
Enter the Username provided by your ISP.
Username:
Password: Enter the Password provided by your ISP.
Select either Always on, On demand, or Manual.
Reconnect Mode:
Maximum Idle Time: Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP Address: Enter the PPTP IP Address provided by your ISP (for Static IP only).
PPTP Subnet Mask: Enter the PPTP Subnet Mask provided by your ISP (for Static IP only).
PPTP Gateway IP Enter the PPTP Gateway IP Address provided by your ISP (for Static
Address:
IP only).
Enter the Primary DNS Server IP address assigned by your ISP.
Primary DNS Server:
Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - by default this field will be set to
Auto. Select Manual if you need to change the MTU for optimal
performance with your ISP.
Click Save when you are done.
D-Link DIR-890L User Manual

PPTP

35