Primary And Secondary 5Ghz - D-Link DIR-890L User Manual

Section 3 - Configuration
Status: Enable or disable the wireless frequency band.
Wi-Fi Name Create a Wi-Fi Name for your wireless network using up to 32
(SSID):
characters.
Password: Create a Password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Security Mode: Select None, WEP, or WPA/WPA2-Personal (recommended).
802.11 Mode: Select the preferred wireless networking standard for each band.
The available options will depend on the wireless frequency band,
as well as the currently selected security mode.
Wi-Fi Channel: Select the desired channel. The default is Auto (recommended).
Transmission Select the desired wireless transmission power (High, Medium or
Power: Low).
Channel Width:
Select Auto 20/40/80 MHz if you are using 802.11ac, 802.11n, and
non-802.11n wireless devices, or select Auto 20/40 MHz if you are
using both 802.11n and non-802.11n wireless devices.
D-Link DIR-890L User Manual

Primary and Secondary 5GHz

53