D-Link DIR-890L User Manual page 17

Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the
Power LED does not light up, press the Power button on the back of the router.
6. After the router has powered up, verify that the Power (white) and Internet (white or orange) LEDs are both lit.
Proceed with router configuration.
D-Link DIR-890L User Manual
DIR-890L
USB 3.0 USB 2.0
RESET
Modem
1 2 3 4
WSP INTERNET POWER DCN IN
-
12V SA ...
12