EN
3.1.1. Repositioning of Thermostat and Timer
Thermostat and timer are located on the front of
the heater. If desired they may be moved to the
right or left side of the heater. Such repositioning
should only be carried out by a qualified electrician.
See figure 7.
Make sure that the protective piece of rubber
on the overheat protector's reset button stays
in place during repositioning.
Figure 7.
Repositioning of Thermostat and Timer
Obrázek 7. Změna umístění termostatu a časovače
2
1
CZ
3.1.1. Změna místa termostatu a časovače
Termostat a časovač jsou standartně umístěny na přední
části kamen, v případě nutnosti se dají umísti I na boky
kamen. Tyto změny by měl provádět elektrikář.
Obr. 7
Ujistěte se, že při změně ovladačů zůstane ochraný guma u
Tlačítka ochrany proti přehřátí.
11