Listening To The Radio - Denon AVR-1404 Operating Instructions Manual

Hide thumbs Also See for AVR-1404:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
15

LISTENING TO THE RADIO

Auto preset memory
This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in
the preset memory.
1
1
2 DEFAULT VALUE
AUTO TUNER PRESETS
A1 ~ A8
87.5/89.1/98.1/108/90.1/90.1/90.1/90.1 MHz
B1 ~ B8
522/603/999/1404/1611 kHz/90.1/90.1/90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
24
1
When the main unit's power operation switch
turn on while pressing the set's PRESET D
button the unit automatically begins searching
for FM broadcast stations.
(Main unit)
2
When the first FM broadcast station is found,
that station is stored in the preset memory at
channel
A1.
Subsequent
stations
automatically stored in order at preset channels
A2 to A8, B1 to B8, C1 to C8, D1 to D8 and E1
to E8, for a maximum of 40 stations.
3
Channel A1 is tuned in after the auto preset
memory operation is completed.
NOTES:
• If an FM station cannot be preset automatically due
to poor reception, use the "Manual tuning"
operation to tune in the station, then preset it using
the manual "Preset memory" operation.
• To interrupt this function, press the power operation
switch.
Auto tuning
1
2
4
1
4
3
2
are
Manual tuning
1
Set the input source to "TUNER".
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO"
indicator turns off.
1
Set the input source to "TUNER".
(Main unit)
(Remote control unit)
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
(Main unit)
(Remote control unit)
3
Press the MODE button to set the auto tuning
mode.
Lit
(Remote control unit)
4
Press the TUNING D (+) or H (–) button.
(Main unit)
(Remote control unit)
• Automatic searching begins, then stops
when a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the
"STEREO" indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the "TUNED" and
"STEREO" indicators turn off.
3
Press the MODE button to set the manual
tuning mode.
Check that the display's "AUTO" indicator
turns off.
4
Press the TUNING D (+) or H (–) button to tune
in the desired station.
The frequency changes continuously when the
button is held in.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents