Radio Frequency Interference
This equipment has been tested and found to comply with EMC limits specified by IEC/
EN 60601‐1‐2. These limits are designed to provide a reasonable protection against
electromagnetic interference in a typical medical installation.
Other devices may experience interference from even the low levels of electromagnetic
emissions permitted by the above standards. To determine if the emissions from the
Perfecto
is causing the interference, turn the Perfecto
2
other device(s) stops, then the Perfecto
interference may be reduced or corrected by one of the following measures:
• Reposition, relocate, or increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different from that to which the
other device(s) is connected.
Avoid creation of any spark near medical oxygen equipment. This includes sparks from
static electricity created by any type of friction.
Part No 1154245
SECTION 1—IMPORTANT SAFEGUARDS
Off. If the interference with the
2
is causing the interference. In such rare cases,
2
11
™
Perfecto
2