4. Disconnect and remove the RTC battery from the audio board.
5. Separate the HDD flat cable connector from the audio board.
Removing the Main Board
To remove the main board, first remove the top cover (see
the FDD (see
Removing the
Board
) then perform the following steps:
Fig. 41 Lifting the Audio Board
Fig. 42 Removing the RTC Battery
Fig. 43 Removing the HDD flat cable connector
FDD) and remove the audio board (see
NEC Versa M320 Disassembly Manual
Removing the Top
Cover), remove
Removing the Audio
Page 23